Linder Quality Architectural Coatings-Linder Paint

Linder Quality Architectural Coatings

Product Introduction

Linder quality architectural coatings have decorative function, protective function and residence improvement function.
The decorative function is to improve the appearance value of the building through beautification; the protective function refers to the function of protecting the building from the influence and damage of the environment, and the content of the protective function requirements varies for different kinds of protected bodies; the occupancy improvement function is mainly for indoor painting, which is the function that helps to improve the living environment.

Product Introduction

Product Description

Product Features

1.Convenient to construct
2.Strong decorative properties
3.Excellent environmental performance
4.Good adhesion
5.Strong weather resistance

Construction process

Construction method: brush, roller, spraying

Substrate requirements

The base should be solid, flat, clean and dry.

Dilution

Dilute with ≤10% water depending on the construction condition, excessive dilution will affect the color and coating life.

Stir well before use.

Recoating time (in terms of dry film 30 microns, 25~30℃)

Recoating: ≥2 hours

Maintenance time

7 days/25℃: low temperature (should not be lower than 5℃) appropriate extension, in order to obtain the ideal paint film effect.

Construction conditions

Please do not construct in wet or cold weather (temperature <5℃, relative temperature >85%), otherwise the expected painting effect cannot be achieved.

Cleaning

When stopping in the middle of painting and after finishing, please wash all the instruments with water in time.

Substrate treatment

surface treatment	Remove surface dust, grease and loose plaster from new walls, repair any holes in time and ensure that the walls are clean, dry and level.	Repainting the wall to remove the old wall not solid paint film, remove surface dust chalk and impurities, batch leveling and sanding, clean and thoroughly dry.
surface state	Ensure that the surface humidity of the pre-coated substrate is <10% and the pH value is <10.	The surface of the pre-coated substrate must be firm, dry, clean, flat and free of loose material.

Coating System and Number of Coats

Painting System	primers	top coat
Construction method	“Linder Multi-Functional Anti-Alkali Sealing Primer” once more	Two coats of “Linder topcoat”

Safety matters

1.Please be sure to read the construction instructions of the product package carefully before use, in order to obtain reliable and satisfactory painting effect;
2.Open all windows and doors as much as possible before starting operation and use to ensure that the construction area has sufficient ventilation;
3.In case of allergic skin, always wear protective gears during use; in case of inadvertent contact with eyes, rinse immediately with plenty of water; in case of inadvertent contact with skin and causing persistent pain or irritating sensation, rinse immediately with plenty of water and seek medical assistance;
4.Do not allow children or pets to enter the construction area and keep the product out of their reach; if accidentally contaminated with children, immediately flush with plenty of water and seek medical assistance;
5.Do not pour paint into sewers or drains;

6.dispose of paint waste in accordance with local environmental standards.

Storage

Store tightly closed in a cool and dry place at 0-40℃.

Shelf life: 24 months

products